Airless tire repair kit AMIO-01251

The airless tire repair kit is perfect as a replacement for the spare tire and is an ideal addition to your car's equipment. The kit is designed for airless tires and allows you to quickly and efficiently repair punctures.

The compact dimensions of the kit make it very convenient to always have it on hand. You never know what might happen on the road, so it's worth having this kit!

Package contents:

• Drill with handle
• Pin with handle
• 5 vulcanization cords, 10 cm each
• Glue 12 g
• The kit allows you to quickly repair a flat tire.
• Perfect for outdoor use when there is no way to change a tire.

Important:

• This is a temporary solution that allows you to drive to your destination or the nearest tire repair shop.
• The kit is not suitable for punctured tires or sidewall damage - it is only suitable for the tread area.

Instructions for use:

• Remove the nail from the punctured tire.
• Coat the drill with the glue provided and insert it into the hole under the nail at the same angle as the nail penetrated the tire so that the hole is well filled.
• Thread the string onto a pin and fold it in half, with the ends facing up.
• Apply glue to the cord and press it firmly into the hole with a pin, maintaining the previous angle of penetration. The cord should pass through the entire tire ply. Do not overtighten the cord inward. The two ends should protrude about 0.5-1 cm above the tread. Pull the pin out in a straight motion (do not twist it in the tire - it may break).
• Cut the ends of the cord, leaving about 5 mm above the tire. The cord will be flush with the tread surface as you drive.