Parking assistance system with sound signal, 8 black sensors GOLD 18mm AMIO-01604

A parking sensor is a device that makes parking and reversing easier. It works on the sonar principle - it emits ultrasonic waves, which, when reflected from an obstacle, allow you to determine the distance between the vehicle and the obstacle. During reversing, the device accurately detects obstacles on the road and warns the driver with an audible signal.

The buzzer can operate in three sound modes: high, low and completely muted. The mode is changed using a switch on the housing.

The GOLD version sensors are smaller than standard ones and have a hermetic connector for the wire, so the sensors can be easily disconnected from the car's wiring, for example, when removing the bumper or if the sensor is faulty.

Included:

• 8 sensors
• 4 extension cords
• sound signal transmitter
• 8-sensor control unit (A–D rear, E–H front)
• drill for drilling holes in the bumper
• installation instructions

Technical specification:

• Operating/sensitivity range: 0-2.5 m
• Power supply: 12V
• Operating frequency: 40 kHz
• Operating temperature: –30 °C – +70 °C
• Mounting diameter: 22 mm